General Information
 |
flexiply® is an 8’ x 4’ (2440mm x 1220mm) flexible plywood sheet, easily bent by hand. |
 |
a bend radius as little as 25mm makes this product ideal for tight radius work.
|
 |
flexiply® can be bonded together in its curved form to produce any thickness as required. |
 |
standard thicknesses available are 3mm, 5mm, 8mm and 16mm. |
 |
5mm and 8mm are in long or cross grain, 3mm and 16mm in cross grain only.
|
 |
cross grain will produce a 4’ (1220mm) column. |
 |
long grain will produce an 8’ (2440mm) column.
|
 |
flexiply® can be stained, painted, plastered, veneered or any other finish -the choice is yours. |
 |
shapes can be formed without labour intensive efforts associated with bending plywood. |
 |
unlike pre-made forms flexiply® is supplied in flat 1220mm x 2440mm (4’ x 8’) sheets. |
 |
valuable storage space is saved. |
 |
almost nil wastage. Left over pieces can be stored for use on other projects. |
 |
unformed sections of board simple store flat for use again.
|
 |
no special equipment is required to bend, fabricate or laminate.
|
 |
curves and forms can be produced in a fraction of the time. |
 |
complex multi-radii shapes can be created that would otherwise be virtually impossible. |
 |
columns, circles and curves … easier all round … |
Try and see ! ……… there is only one
|